Filter
Top Products
204 Configuring System Information
Removing a RADIUS Server
1
Open the
RADIUS Settings
page.
2
Click
Show All
.
The
RADIUS Servers List
opens.
3
Select a
RADIUS Servers List
entry.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The RADIUS server is removed, and the device is updated.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed on the
RADIUS Settings page.
Table 6-42. RADIUS Server CLI Commands
CLI Command Description
radius-server timeout
timeout
Sets the interval for which a device waits for a server host to
reply.
radius-server source-ip source Specifies the source IPv4 address that will be used for the IPv4
communication with RADIUS servers.
radius-server source-ipv6 source Specifies the source IPv6 address that will be used for the IPv6
communication with RADIUS servers.
radius-server retransmit
retries
Specifies the number of times the software searches the list of
RADIUS server hosts.
radius-server deadtime
deadtime
Configures unavailable servers to be skipped.
radius-server key
key-string
Sets the authentication and encryption key for all RADIUS
communications between the router and the RADIUS server.
radius-server host
ip-address
[auth-port
auth-port-number
] [timeout timeout]
[
retransmit
retries
] [deadtime
deadtime
]
[
key
key-string
] [source
source
] [priority
priority
]
Specifies a RADIUS server host.
show radius-servers Displays the RADIUS server settings.