Filter
Top Products
388 Configuring Switch Information
Ports requesting to join a specific Multicast group issue an IGMP report, specifying that Multicast group
is accepting members. This results in the creation of the Multicast filtering database.
The Global Parameters page contains fields for enabling IGMP Snooping on the device.
To open the Global Parameters page, click Switch → Multicast Support → Global Parameters in the tree
view.
Figure 7-70. Global Parameters
The
Global Parameters
page contains the following fields:
•
Bridge Multicast Filtering
— Enables or disables bridge Multicast filtering. Disabled is the default
value.
–
Enable
— Enables bridge multicast filtering on the device.
–
Disable
— Disables bridge multicast filtering on the device.
•
IGMP Snooping Status
— Enables or disables IGMP Snooping on the device. Disabled is the default
value. IGMP Snooping can be enabled only if
Global Parameters
is enabled.
– Enable — Enables IGMP Snooping on the device.
– Disable — Disables IGMP Snooping on the device.
Enabling Bridge Multicast Filtering on the device
1
Open the
Global Parameters
page.
2
Select
Enable
in the
Bridge Multicast Filtering
field.
3
Click
Apply Changes
.
Bridge Multicast
Filtering is enabled on the device.