Filter
Top Products
314 Configuring Switch Information
•
Status
— Indicates if the port is currently monitored (
Active
) or not monitored (
Ready
).
•
Remove
— Removes the port mirroring session. The possible field values are:
–
Checked
— Removes the selected port mirroring sessions.
–
Unchecked
— Maintains the port mirroring session.
Adding a Port Mirroring Session
1
Open the
Port Mirroring
page.
2
Click
Add
.
The
Add Source Port
page opens.
Figure 7-28. Add Source Port
3
Define the
Source Port
and the
Ty p e
fields.
4
Click
Apply Changes
.
The new source port is defined, and the device is updated.
Deleting a Copied Port from a Port Mirroring Session
1
Open the
Port Mirroring
page.
2
In the Source Ports table, select the port’s
Remove
check box.
3
Click
Apply Changes
.
The selected port mirroring session is deleted, and the device is updated.
Configuring a Port Mirroring Session Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring a Port Mirroring session
as displayed in the Port Mirroring page.
Table 7-15. Port Mirroring CLI Commands
CLI Command Description
port monitor src-interface [rx | tx] Starts a port monitoring session.