Filter
Top Products
444 Configuring Quality of Service
Queue Settings
•
Strict Priority
— Indicates the system queues are SP queues, when selected.
•
WRR
— Indicates the system queues are WRR queues, when selected.
Enabling Quality of Service:
1
Open the
Global Settings
page
.
2
Select
Enable
in the
Quality of Service
field.
3
Click
Apply Changes
.
Class of Service is enabled on the device.
Enabling the Trust Mode:
1
Open the
Global Settings
page
.
2
Define the
Trust Mode
field.
3
Click
Apply Changes
.
Trust mode is enabled on the device.
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Global
Settings page.
The following is an example of the CLI commands:
This section contians the following topics:
• "Defining QoS Interface Settings" on page 445
• "Defining Bandwidth Settings" on page 446
• "Mapping CoS Values to Queues" on page 448
• "Mapping DSCP Values to Queues" on page 450
Table 9-3. QoS Settings CLI Commands
CLI Command Description
qos trust [cos | dscp] Configures the system to trust mode.
no qos trust Returns to the non-trusted state.
console(config)# qos trust dscp