Filter
Top Products
Configuring System Information 133
3
Modify the interface type.
4
Click
Apply Changes
.
The parameters are modified, and the device is updated.
Deleting IPv4 Addresses
1
Open the
IPv4
Interface Parameters
page.
2
Click
Show All.
The
Interface Parameters Table
page opens.
Figure 6-29. IPv4 Interface Parameter Table
3
Select an IP address and select the
Remove
check box.
4
Click
Apply Changes
.
The selected IP address is deleted, and the device is updated.
Defining IPv4 Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the IPv4
Interfaces Parameters page.
Table 6-20. IPv4 Interface Parameters CLI Commands
CLI Command Description
ip address ip-address {mask |
prefix-length}
Sets an IP address.
no ip address [ip-address] Removes an IP address
show ip interface [ethernet
interface-number | vlan vlan-
id | port-channel number]
Displays the usability status of interfaces
configured for IP.