Filter
Top Products
252 Configuring System Information
Configuration Upload
•
TFTP Server IP Address
— The TFTP Server IP Address to which the Configuration file is uploaded.
•
Destination File Name (1-64 Characters)
— Indicates the Configuration file path to which the file is
uploaded.
•
Transfer File Name
— The software file to which the configuration is uploaded. The possible field
values are:
–
Running Configuration
— Uploads the Running Configuration file.
–
Startup Configuration
— Uploads the Startup Configuration file.
–
My Backup Configuration —
Uploads the Backup Configuration file. This list of user-defined
configuration files only appears if the user had created backup configuration files. For example,
if the user copied the running configuration file to a user-defined configuration file called
BACKUP-SITE-1, this list appears on the File Upload to Server page and the BACKUP-SITE-1
configuration file appears in the list.
Uploading Files
1
Open the
File Upload to Server
page.
2
Define the file type to upload.
3
Define the fields.
4
Click
Apply Changes
.
The software is uploaded to the TFTP server.
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the File
Upload to Server page.
Table 6-54. File Upload CLI Commands
CLI Command Description
copy source-url destination-url Copies any file from a source to a destination.