Filter
Top Products
Configuring System Information 233
Deleting an User Security Model Table Entry
1
Open the
SNMPv3 User Security Model (USM)
page.
2
Click
Show All
.
The
User Security Model Table
opens.
3
Select a
User Security Model Table
entry.
4
Check the
Remove
checkbox.
5
Click
Apply Changes
.
The
User Security Model Table
entry is deleted, and the device is updated.
Defining SNMPv3 Users Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3 User Security Model (USM) page.
The following is an example of the CLI commands:
Table 6-49. SNMPv3 User CLI Commands
CLI Command Description
snmp-server user username groupname
[remote engineid-string][auth-md5
password | auth-sha password | auth-
md5-key md5-des-key | auth-sha-key
sha-des-key]
Configures a new SNMP V3 user.
show snmp users [username] Displays the configuration of users.
console (config)
# snmp-server user John user-group auth-md5 1234
console (config)
# end
console# show snmp users
Name Group Name Auth Method Remote
------- ---------- ----------- ------
John user-group md5