Filter
Top Products
Configuring System Information 161
Displaying the Hosts Name Mapping Table
1
Open the
Host Name Mapping
page
.
2
Click
Show
All
.
The
Hosts Name Mapping Table
page opens.
Figure 6-49. Hosts Name Mapping Table
Removing Host Name from IP Address Mapping
1
Open the
Host Name Mapping
page
.
2
Click
Show
All.
3
The
Host Mapping Table
page opens.
4
Select a
Host Name Mapping Table
entry
.
5
Check the
Remove
checkbox.
6
Click
Apply Changes
.
The
Host Mapping Table
entry is deleted, and the device is updated.
Mapping IP addresses to Domain Host Names Using the CLI Commands
The following table summarizes the equivalent CLI commands for mapping Domain Host names to
IP addresses.
Table 6-29. Domain Host Name CLI Commands
CLI Command Description
ip host name address Defines the static host name-to-address mapping in the host
cache
no ip host name Removes the name-to-address mapping.
clear host {name | *} Deletes entries from the host name-to-address cache.
show hosts [name] Displays the default domain name, list of name server hosts, the
static and the cached list of host names and addresses.