Filter
Top Products
386 Configuring Switch Information
Figure 7-69. LAG Membership
The LAG Membership page contains the following fields:
•
LACP
— Aggregates the port to a LAG, using LACP.
•
LAG
— Adds a port to a LAG, and indicates the specific LAG to which the port belongs.
Adding Ports to a LAG or LACP
1
Open the
LAG Membership
page.
2
In the LAG row (the second row), toggle the button to a specific number to aggregate or remove the
port to that LAG number.
3
In the LACP row (the first row), toggle the button under the port number to assign either the LACP or
the static LAG.
4
Click
Apply Changes
.
The port is added to the LAG or LACP, and the device is updated.
Adding Ports to LAGs Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to LAGs as displayed
in the LAG Membership page.
Table 7-37. LAG Membership CLI Commands
CLI Command Description
channel-group
port-
channel-number
mode
{
on | auto}
Associates a port with a port-channel. Use the no form of
this command to remove the channel-group configuration
from the interface.
show interfaces port-channel
[
port-channel-number]
Displays port-channel information.