Filter
Top Products
Configuring Switch Information 295
Querying the Database
1
Open the
Binding Database
page.
2
Select the following categories:
–
MAC Address
— Indicates the MAC addresses recorded in the DHCP Snooping Database.
–
IP Address
— Indicates the IP addresses recorded in the DHCP Snooping Database.
–
VLAN
— Indicates the VLANs recorded in the DHCP Snooping Database.
–
Interface
— Contains a list of interfaces recorded in the DHCP Snooping Database. The possible
field values are: Port and LAG.
In addition to the fields above, the following fields appear in the Query result Table:
–
VLAN ID
— Displays the VLAN ID to which the IP address is attached in the DHCP Snooping
Database.
–
Ty p e
— Displays the IP address binding type. The possible field values are
Static
which indicates
that the IP address was statically configured, and
Dynamic
which indicates that the IP address was
dynamically configured.
–
Lease Time
— Displays the lease time. The Lease Time defines the amount of time the entry is
active in the DHCP Database. Entries whose lease times are expired are ignored by the switch.
3
Click
Query
.
Removing a Database Entry
1
Open the
Binding Database
page.
2
In the table, click the checkbox in the
Remove
column next to the desired entry.
3
Click
Apply Changes
.
Clearing the Dynamic Database
1
Open the
Binding Database
page.
2
Click
Clear Dynamic
.