Filter
Top Products
358 Configuring Switch Information
•
Dynamic
— Assigns a port to a VLAN based on the host source MAC address connected to the port.
–
Checked
— The port may be registered in a dynamic VLAN.
–
Unchecked
— The port is not allowed to register in a dynamic VLAN.
•
PVID (1-4095)
— Assigns a VLAN ID to untagged packets. The possible values are 1-4095.
VLAN 4095 is defined as per standard and industry practice as the Discard VLAN. Packets classified to
the Discard VLAN are dropped.
•
Frame Type
— Packet type accepted on the port. Possible values are:
–
Admit Tag Only
— Only tagged packets are accepted on the port.
–
Admit All
— Both tagged and untagged packets are accepted on the port.
•
Ingress Filtering
— Ingress filtering discards packets that are destined to VLANs of which the specific
port is not a member.
–
Enable
— Ingress filtering is activated on the port.
–
Disable
— Ingress filtering is not activated on the port.
•
Current Reserved VLAN
— The VLAN currently designated by the system as the reserved VLAN.
•
Reserve VLAN for Internal Use
— The VLAN selected by the user to be the reserved VLAN if not in
use by the system.
Assigning Port Settings
1
Open the
VLAN Port Settings
page.
2
Select the port to which settings need to be assigned from the
Port
drop-down menu.
3
Complete the remaining fields on the page
4
Click
Apply Changes
.
The VLAN port settings are defined, and the device is updated.