Filter
Top Products
402 Configuring Switch Information
Setting the Unregistered Multicast Status of an Interface
1
Open the
Unregistered Multicast
page.
2
Select the interface for which Unregistered Multicast needs to be set.
3
Select a status in the
Status
field.
4
Click
Apply Changes
.
Unregistered Multicast status is set.
Displaying the Unregistered Multicast Table
1
Open the
Unregistered Multicast
page.
2
Click
Show All
.
The
Unregistered Multicast Table
opens.
Figure 7-77. Unregistered Multicast Table
The Unregistered Multicast Table displays the following additional fields:
•
Unit No.
— Selects a stacking member.
•
Copy from
— Copies parameters from the selected item.
Copying Unregistered Multicast Settings Between Interfaces
1
Open the
Unregistered Multicast
page.
2
Click
Show All
. The
Unregistered Multicast Table
opens.
3
In the
Copy Parameters from
field, select the interface from which to copy.
4
For each interface to which you want to copy parameters, select the checkbox in the
Copy to
field.
Alternativey, click
Select All
to automatically select all interfaces.
5
Click
Apply Changes
.
The Unregistered Multicast parameters are copied between the interfaces.