Filter
Top Products
Configuring System Information 235
•
Basic
— Enables
SNMP Basic mode for a selected community. The possible field values are:
–
Access Mode
— Defines the access rights of the community. The possible field values are:
Read-Only
— Management access is restricted to read-only, and changes cannot be made to the
community.
Read-Write
— Management access is read-write and changes can be made to the device
configuration, but not to the community.
SNMP-Admin
— User has access to all device configuration options, as well as permissions to
modify the community.
–
View Name
— Contains a list of user-defined SNMP views
•
Advanced
— Contains a list of user-defined groups. When SNMP Advanced mode is selected,
the SNMP access control rules comprising the group are enabled for the selected community.
The Advanced mode also enables SNMP groups for specific SNMP communities. The SNMP
Advanced mode is defined only with SNMPv3. The possible field value is:
–
Group Name
— Specifies the name of the group when working in SNMP Advanced mode.
Remove — Removes a community from the specified device.
–
Checked
— Removes the community.
–
Unchecked
— Maintains the community in the specified device.
When defining a new SNMP community, the following additional parameters are available:
•
Supported IP Format
— Specifies the IP format supported by the community. The possible values are:
–
IPv6
— IP version 6 is supported.
–
IPv4
— IP version 4 is supported.
•
IPv6 Address Type
— When the community supports IPv6 (see previous parameter), this specifies the
type of static address supported. The possible values are:
–
Link Local
— A Link Local address that is non-routable and used for communication on the same
network only.
–
Global
— A globally unique IPv6 address; visible and reachable from different subnets.
•
Link Local Interface
— When the server supports an IPv6 Link Local address (see previous
parameter), this specifies the the Link Local interface. The possible values are:
–
VLAN1
— The IPv6 interface is configured on VLAN1.
–
ISATAP
— The IPv6 interface is configured on ISATAP tunnel.