Filter
Top Products
Configuring System Information 183
Assigning Secure HTTP Sessions an Authentication Sequence
1
Open the
Select Authentication
page.
2
Select an authentication sequence in the
Secure HTTP
field.
3
Click
Apply Changes
.
Secure HTTP sessions are assigned an authentication sequence.
Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Select
Authentication page.
The following is an example of the CLI commands:
Table 6-35. Select Authentication CLI Commands
CLI Command Description
enable authentication
[default | list-name]
Indicates the authentication method list when
accessing a higher privilege level from a remote Telnet,
Console or SSH.
login authentication
[default | list-name]
Indicates the login authentication method list for a
remote Telnet, Console or SSH.
ip http authentication
method1 [method2.]
Indicates authentication methods for HTTP servers.
ip https authentication
method1 [method2.]
Indicates authentication methods for HTTPS servers.
show authentication
methods
Displays information about the authentication
methods.
console(config-line)# enable authentication default
console(config-line)# login authentication default
console(config-line)# exit
console(config)# ip http authentication radius local
console(config)# ip https authentication radius local
console(config)# exit
console# show authentication methods
Login Authentication Method Lists
---------------------------------
Console_Default : None