Filter
Top Products
Configuring System Information 117
The following is an example of the CLI commands:
Table 6-14. Global Log Parameters CLI Commands
CLI Command Description
logging on Enables error message logging.
logging {
ipv4-address | ipv6-address | hostname}
[port port] [severity level] [facility facility]
[description text]
Logs messages to a syslog server. For a list of the Severity levels,
see "Log Severity Levels" on page 117.
logging console level Limits messages logged to the console based on severity.
logging buffered level Limits syslog messages displayed from an internal buffer
(RAM) based on severity.
logging file level Limits syslog messages sent to the logging file based on
severity.
clear logging Clears logs.
clear logging file Clears
messages from the logging file.
show syslog servers Displays the syslog servers settings.
console(config)# logging on
console(config)# logging console errors
console(config)# logging buffered debugging
console(config)# logging file alerts
console(config)# end
console# clear logging file
Clear Logging File [y/n]y
Console# show syslog-servers
Device Configuration
-----------------------------
IP address Port facility Severity Description
---------- ---- -------- -------- -----------
1.1.1.1 514 local7 info
fe80::11%vlan1 514 local7 info
3211::22 514 local7 info