Filter
Top Products
266 Configuring Switch Information
•
Supplicant Timeout (1-65535)
— Indicates the amount of time that lapses before EAP requests are
resent to the supplicant. The field value is in seconds. The field default is 30 seconds.
•
Max EAP Requests (1-10)
— Indicates that total amount of EAP requests sent. If a response is not
received after the defined period, the authentication process is restarted. The field default is 2 retries.
Displaying the Port Based Authentication Table
1
Open the
Port Based Authentication
page.
2
Click
Show All
.
The
Port Based Authentication Table
opens.
Figure 7-2. Port Based Authentication Table
In addition to the fields in the Port Based Authentication Table also displays the following fields:
•
Unit No.
— Selects a stacking member.
•
Copy Parameters from Port No.
— Copies parameters a the selected port.
Copying parameters in the Port Based Authentication Table
1
Open the page.
2
Click
Show All
.
The
Port Based Authentication Table
opens.
3
Select the interface in the
Copy Parameters from Port No.
field.
4
Select an interface in the
Port Based Authentication Table
.
5
Check the
Copy to
check box to define the interfaces to which the Port based authentication
parameters are copied.
6
Click
Apply Changes
.