Filter
Top Products
Configuring System Information 163
The ARP Settings page contains the following fields:
•
Global Settings
— Select this option to activate the fields for ARP global settings.
•
ARP Entry Age Out (1-40000000)
— For all devices, the amount of time (seconds) that passes
between ARP requests about an ARP table
entry. After this period, the entry is deleted from the
table. The range is
1 - 40000000
seconds. The default value is 60000 seconds.
•
Clear ARP Table Entries
— The type of ARP entries that are cleared on all devices. The possible
values are:
•
None
— ARP entries are not cleared.
•
All
— All ARP entries are cleared.
•
Dynamic
— Only dynamic ARP entries are cleared.
•
Static
— Only static ARP entries are cleared.
•
ARP Entry
— Select this option to activate the fields for ARP settings on a single Ethernet devices.
•
Interface
— The interface number of the port, LAG, or VLAN that is connected to the device.
•
IP Address
— The station IP address, which is associated with the MAC address filled in below.
•
MAC Address
— The station MAC address, which is associated in the ARP table with the IP address.
•
Status
— The ARP Table
entry status. Possible field values are:
•
Dynamic
— The ARP entry is learned dynamically.
•
Static
— The ARP entry is a static entry.
•
Remove ARP Entry
— Removes an ARP entry.
–
Checked
— Removes the ARP entry.
–
Unchecked
— Maintains the ARP entry.
Adding a Static ARP Table Entry:
1
Open the
ARP Settings page
.
2
Click
Add
.
The
Add ARP Entry
page opens.
3
Select an interface.
4
Define the fields.
5
Click
Apply Changes
.
The
ARP Table
entry is added, and the device is updated.
Displaying the ARP Table
1
Open the
ARP Settings page
.
2
Click
Show All
.
The
ARP Table
page opens.