Filter
Top Products
Configuring Switch Information 375
Figure 7-62. Voice VLAN Global Parameters
•
Voice VLAN Status
— Indicates if Voice VLAN is enabled on the device. The possible field values are:
–
Enable
— Enables Voice VLAN on the device.
–
Disable
— Disables Voice VLAN on the device. This is the default value.
•
Voice VLAN ID
— Defines the Voice VLAN ID number.
•
Class of Service
— Enables adding a CoS tag to untagged packets received on the voice VLAN.
The possible field values are 0-7, where zero is the lowest priority, and seven is the highest priority.
•
Remark CoS
— Indicates that the Remark CoS is always enabled.
•
Voice VLAN Aging Time
— Indicates the amount of time after the last IP phone's OUI is aged out for
a specific port. The port will age out after the bridge and voice aging time. The default time is one day.
The field format is Day, Hour, Minute. The aging time starts after the MAC Address is aged out from
the Dynamic MAC Address table. The default time is 300 sec. For more information on defining
MAC address age out time, see Defining Aging Time.
Configuring Voice VLAN global parameters:
1
Open the
Voice VLAN Global Parameters
page.
2
Complete the fields on the page.
3
Click
Apply Changes
.
The Voice VLAN global parameters are defined, and the device is updated.