Filter
Top Products
Configuring System Information 249
Configuration Download
•
Server IP Address
— The TFTP Server IP Address from which the configuration files are downloaded.
•
Source File Name (1-64 characters)
— Indicates the configuration files to be downloaded.
•
Destination File
— The destination file to which the configuration file is downloaded. The possible
field values are:
–
Running Configuration
— Downloads commands into the Running Configuration file.
–
Startup Configuration —
Downloads the Startup Configuration file, and overwrites it.
–
<filename>
— Downloads commands into a configuration backup file. The filename is
determined by the user at download.
Downloading Files
1
Open the
File Download from Server
page.
2
Define the file type to download.
3
Define the fields.
4
Click
Apply Changes
.
The software is downloaded to the device. To activate the selected Image file, reset the device.
For information on resetting the device, see Switching Between Stack Masters.
Downloading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the File
Download from Server page.
The following is an example of the CLI commands:
NOTE: Each exclamation mark (!) indicates that ten packets were successfully transferred.
Table 6-53. File Download CLI Commands
CLI Command Description
copy source-url destination-url Copies any file from a source to a destination.
console# copy tftp://10.6.6.64/pp.txt startup-config
....!
Copy: 575 bytes copied in 00:00:06 [hh:mm:ss]
01-Jan-2000 06:41:55 %COPY-W-TRAP: The copy operation was
completed successfully