Filter
Top Products
270 Configuring Switch Information
Displaying the Multiple Hosts Table
1
Open the
Multiple Hosts
page.
2
Click
Show All
.
The
Multiple Hosts Table
opens.
Figure 7-4. Multiple Hosts Table
The Multiple Hosts Table displays the following additional field:
•
Unit No.
— Selects a stacking member.
Enabling Multiple Hosts Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the advanced port based
authentication as displayed in the Multiple Hosts page.
The following is an example of the CLI Command.
Table 7-2. Multiple Hosts CLI Commands
CLI Command Description
dot1x multiple-hosts Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.
dot1x single-host-
violation {forward
|discard |discard-
shutdown}[trap
seconds]
Configures the action to be taken when a station,
whose MAC address is not the client (supplicant)
MAC address, attempts to access the interface.
Console(config)# interface ethernet 1/e1
Console(config-if)# dot1x multiple-hosts