Filter
Top Products
Configuring Switch Information 345
Displaying the MSTP VLAN to Instance Mapping Table
1
Open the
Spanning Tree MSTP Settings
page.
2
Click
Show All
to open the
MSTP VLAN to Instance Mapping Table
.
Figure 7-43. MSTP VLAN to Instance Mapping Table
Defining MST Instances Using CLI Commands
The following table summarizes the equivalent CLI commands for defining MST instance groups as
displayed in the Spanning Tree MSTP Settings page.
Table 7-23. MSTP Instances CLI Commands
CLI Command Description
spanning-tree mst configuration Enters MST Configuration mode.
instance instance-id {add | remove} vlan vlan-
range
Maps VLANs to the MST instance.
name string Sets the configuration name.
revision value Sets the configuration revision number
spanning-tree mst instance-id port-priority
priority
Sets the priority of a port.
spanning-tree mst instance-id priority priority Sets the device priority for the specified spanning tree instance.
spanning-tree mst max-hops hop-count Sets the number of hops in an MST region before the BPDU is
discarded and the information held for a port is aged.