Filter
Top Products
Chapter 7 Servo Parameters|ASDA-B Series
7-72 Revision February 2008, Doc. Name: 2006PDD23000009
• Reserve / Clear Memory Block Function Settings
0: Reserve memory block
1: Clear memory block
When the clear memory block function is selected, the memory block will be cleared.
This parameter setting will return to its default setting after clear function is executed successfully.
P8 - 12
KRNO Memory Block Position Number (ROMx) Communication Addr.: 080CH
Default: 0 Related Section: N/A
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 24
This parameter is used to determine the memory block number (ROMx) shown on the keypad
display.
P8 - 13★
KBL0 Status of Memory Block (ROMx) Communication Addr.: 080DH
Default: 0 Related Section: N/A
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 23999
Settings:
ASD-PU-01A ASD-PU-01B
• Drive Rated Power Settings:
002: 200W
003: 400W (F604)
004: 750W
005: 1kW
006: 1.5kW
007: 2kW
103: 400W(F804)
• Motor Inertia Settings:
1: Low inertia
2: Medium inertia
3: High inertia
• Drive Series Settings:
1: ASDA-A series
2: ASDA-B series
This parameter displays the status of memory block number (ROMx) by referring the setting of
parameter P8-12.