Filter
Top Products
System Management: Vendor Commands
10009109-01 ATCA-9305 User’s Manual
7-27
Get Serial Interface Properties
The Get Serial Interface Properties command is used to get the properties of a particular
serial interface.
Table 7-18: Get Serial Interface Properties Command
Response Data 7 Bits [4:7] Clock Bus 2 Events
These bits indicate pending Clock Bus 2 requests arrived from
the carrier controller:
0Clock Bus 2 Query
1 Clock Bus 2 Release
2Clock Bus 2 Force
3Clock Bus 2 Free
Bits [0:3] Clock Bus 1 Events
These bits indicate pending Clock Bus 1 requests arrived from
the carrier controller:
0Clock Bus 1 Query
1 Clock Bus 1 Release
2Clock Bus 1 Force
3Clock Bus 1 Free
8 Bits [4:7] reserved
Bits [0:3] Clock Bus 3 Events
These bits indicate pending Clock Bus 3 requests arrived from
the carrier controller:
0Clock Bus 3 Query
1 Clock Bus 3 Release
2Clock Bus 3 Force
3Clock Bus 3 Free
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4Interface ID
0Serial Debug Interface
1 Payload Interface
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Type: Byte: Data Field: (continued)