Filter
Top Products
3-38 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Redundancy Redundancy statuses of DC-to-DC Converters 0 and 1:
• Redundant: Redundancy is maintained.
• Non-redundant: Sufficient Resources: Redundancy is lost, but
there are enough converters to continue system operation.
• Non-redundant: Insufficient Resources: Redundancy is lost, and
there are not enough converters to continue system operation.
DDC#00 to #01 Statuses of DC-to-DC Converters 0 and 1:
• OK: Operating normally
• Not present: Not installed
• Configuration error: Configuration error
• Failed: Failure
Redundancy Redundancy statuses of DC-to-DC Converters 02 to 04.
These statuses are displayed in the same way as the redundancy
statuses of DC-to-DC Converters 00 and 01.
DDC#02 to #04 Statuses of DC-to-DC Converters 02 to 04.
These statuses are displayed in the same way as the statuses of DC-
to-DC Converters 00 and 01.
Redundancy Redundancy statuses of DC-to-DC Converters 05 and 06.
These statuses are displayed in the same way as the redundancy
statuses of DC-to-DC Converters 00 and 01.
DDC#05 to #06 Statuses of DC-to-DC Converters 05 and 06.
These statuses are displayed in the same way as the statuses of DC-
to-DC Converters 00 and 01.
Redundancy Redundancy statuses of DC-to-DC Converters 07 to 13.
These statuses are displayed in the same way as the redundancy
statuses of DC-to-DC Converters 00 and 01.
DDC#7 to #13 Statuses of DC-to-DC Converters 07 to 13.
These statuses are displayed in the same way as the statuses of DC-
to-DC Converters 00 and 01.
SSM Slow-start circuit status:
• OK: Operating normally
• Failed: Failure
Vo l t a g e
Sensor Voltage sensor type
Vo l t a g e Current voltage reading
Threshold Warning
(Low/High)
Lower and upper limits of the warning-level voltage. If no limit is
set, "-" is displayed.
Critical
(Low/High)
Lower and upper limits of the critical-level voltage. If no limit is
set, "-" is displayed.
Item Description