Filter
Top Products
C122-E003-02EN 3-147
MMB
3.5 Network Configuration Menu
Table 3.114 Displayed and setting items in the [Edit Filter] window
Table 3.115 Buttons in the [Edit Filter] window
(1) Menu operation
[Network Configuration] → [Access Control] → [Add Filter]/[Edit Filter]
(2) GUI operation
1 Make [Protocol], [Access Control], and/or other settings, enter an IP address
and a subnet mask, and then click the [Apply] button.
Additions or changes are then made to management information accordingly.
Item Description
Protocol Select the target protocol for IP filtering from the pulldown list:
•HTTP
• HTTPS
•Telnet
• SSH
•SNMP
Access Control Select the [Enable] or [Disable] radio button to specify whether to
use access control.
Selecting [Disable] permits access from any IP address using the
protocol selected above. Furthermore, the [IP Address] and
[Subnet Mask] fields described below are grayed out, and input to
them is not possible.
Selecting [Enable] enables input in the [IP Address] and [Subnet
Mask] fields and permits access from the specified IP address
using the protocol selected in [Protocol].
IP Address Enter an IP address that has access permission.
Subnet Mask Enter the subnet mask of IP addresses that have access permission.
Button Description
Apply After completing the [Protocol], [Access Control], and/or other
settings, click the [Apply] button. The specified information takes
effect on the system.
Cancel Click the [Cancel] button to revert to the original settings for the
protocol and access control.