Filter
Top Products
C122-E003-02EN 8-35
GSWB
8.2 Configuration Definition Commands
Action: Collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.2.2.2 exit
This command causes a transition to the previous command mode or exits the current
command mode. If the command is executed in global configuration mode, editing of
all configuration definitions being edited is terminated, and the associated
configuration definition command is terminated.
(1) Synopsis
(2) Options
None
(3) Command mode
All
(4) See also
configure
open
(5) Examples
• Returns to the previous command mode or exits the current command mode
exit
Switch(config-if)# exit
Switch(config)# exit
Switch# exit