Filter
Top Products
8-164 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(4) See also
save
save config
restore config
(5) Examples
• Clears the configuration definition
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Command is already running.
Cause: Execution of one of the following commands is in progress:
change, reload, install.
Action: Re-enter the command after the command currently being executed ends.
• Bank cannot be switched.
Cause: Banks cannot be switched.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and then restart the unit. Alternatively,
contact a certified service engineer.
Switch# clear config 0
Are you sure? [y/n]: y
Now perform...
Switch#