Filter
Top Products
C122-E003-02EN 8-203
GSWB
8.3 Operation Commands
Specify the IP address basically in the form of xxx.xxx.xxx.xxx. xxx is a decimal
number ranging from 0 to 255.
z cyclic (optional)
Displays the reply results after an ICMP (Echo Request) packet is transmitted at an
interval of 1 second. If the cyclic option is specified, statistical information is
displayed when all information has been gathered. If this option is specified, the
icmp_seq sequence number, which is the transmission/reception count, is displayed.
When the sequence number exceeds 65535, it is reset to 0. If this option is omitted,
the command will send one ICMP packet.
z length <length> (optional)
ICMP data size. The ICMP header is not included. Specify a value ranging from 0 to
4500 bytes. If this option is omitted, the ICMP data size is 56 bytes. If 7 bytes or less
is specified, the timer value is not displayed. If the specified length is in a range of 0
to 7, the time value indicating the response time is not displayed.
z count<counter> (optional)
Number of times that packets are transmitted. Specify a value ranging from 0 to
65535. If this option is omitted or 0 is specified, an infinite value is assumed with
transmission terminated when the [Ctrl]+[C] keys are pressed.
z timeout <seconds> (optional)
Reply monitoring time. Specify a value ranging from 0 to 600 seconds. If 0 is
specified, an infinite value is assumed with a timeout occurring when the [Ctrl]+[C]
keys are pressed or an ICMP (Echo Reply) packet is received. The default value is 20
seconds.
(3) Command Mode
user exec
enabled exec
(4) See also
None