Filter
Top Products
C122-E003-02EN 8-31
GSWB
8.2 Configuration Definition Commands
8.2.1.5 restore config
This command overwrites the configuration definition file with the contents in the
work area.
Note: This command cannot be executed during execution of the clear config, clear
ramdisk, restore config, save, save config, or tftp command.
(1) Synopsis
(2) Options
z {config0 | config1}
- config0: Overwrites config0 with the contents in the work area.
- config1: Overwrites config1 with the contents in the work area.
(3) Command mode
enabled exec
(4) See also
clear config
clear ramdisk
save
save config
tftp
(5) Examples
• Overwrites config0 with the contents in the work area
restore config {config0 | config1}
Switch# restore config config0
Are you sure? [y/n]:y
Now perform...
Switch#