Filter
Top Products
8-4 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
8.1.5 Configuration definition command operations
This section describes operation in configuration definition mode and in global edit
mode.
Configuration definition mode
This mode is used to change a definition currently in use.
Device behavior is modified according to the entered configuration definition
command. When a valid command has been entered, its definition is immediately
reflected in device behavior. However, the exec-timeout command is effective only in
the behavior of terminals logged in afterwards.
Device behavior is modified without restarting the device when a configuration
definition command is entered in configuration definition mode. Conversely, device
behavior is not modified while the device is operating unless a configuration
definition command is entered in configuration definition mode.
Global edit
This mode is used exclusively for editing the configuration definition file.
Even if a configuration definition command is entered, the current behavior of the
device is not modified.
A new configuration definition or another configuration definition can be edited.
Port channel
port 27 port-channel 1 26 port-channel 1
port 28 port-channel 2 27 port-channel 2
port 29 port-channel 3 28 port-channel 3
port 30 port-channel 4 29 port-channel 4
port 31 port-channel 5 30 port-channel 5
port 32 port-channel 6 31 port-channel 6
port 33 port-channel 7 32 port-channel 7
Setting mode Prompt Description
Configuration definition mode
(Config mode)
Switch(config)# The current behavior is
modified.
Global edit (Edit mode) Switch(edit)# The current behavior is
not modified.
Type
GSWB Web-UI
Port number Interface name ID Interface name