Filter
Top Products
C122-E003-02EN 7-39
GSWB
7.5 Management Menu
Table 7.42 Displayed and setting items in the [SNMP Community] window
Table 7.43 Buttons in the [SNMP Community] window
(1) Menu operation
[Switch] → [GSWB#x] → [Management] → [SNMP] → [SNMP Community]
(2) GUI operation
• SNMP Agent setting
1 Specify values in [Location] and [Contact].
2 Click the [Apply] button.
Item Description
Location Specify the installation location of a local device.
Enter a character string consisting of up to 64 en-size
alphanumeric characters and symbols, which may include ' _ - @ .
and ".
Default: none
Contact Specify the contact information about a local device.
Enter a character string consisting of up to 64 en-size
alphanumeric characters and symbols, which may include ' _ - @ .
and ".
Default: none
IP Address Specify the host IP address (target receiver).
Enter values ranging from 0 to 255.
Default: No value
SNMP Version Specify the version (1 or 2):
• 1: Security model with the lowest security
• 2: Security model with the second lowest security
Access Mode Select an access mode:
• Read-Only: Sets the access privilege to the MIB tree to Read-
Only.
• Read-Write: Sets the access privilege to the MIB tree to Read/
Write.
Community String Enter a community string, whose function is similar to a password.
Enter a character string consisting of up to 20 en-size
alphanumeric characters.
Button Description
Help Displays the Help window.
Apply Sets the specified values.
Cancel Closes the window without saving the change.