Filter
Top Products
C122-E003-02EN 8-79
GSWB
8.2 Configuration Definition Commands
• Resets the CoS map to the default value
(2) Options
z <default-priority-id>
Priority of frames without tags. The setting range is 0 to 7, and the default value is 0.
The highest priority is 7.
(3) Command mode
Interface
(4) See also
wrr-queue cos-map
(5) Examples
• Sets the priority to 3
• Sets priority 1 for a port-channel port
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
no switchport priority default
Switch(config-if)# switchport priority default 3
Switch(config-if)#
Switch(config)# interface port-channel 1
Switch(config-if)# switchport priority default 1
Switch(config-if)#