Filter
Top Products
C122-E003-02EN 8-111
GSWB
8.2 Configuration Definition Commands
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.2.16.2 exec-timeout
This command sets the timeout time of a remote console (telnet, ssh). The specified
time is enabled for the terminals that log in after the command is executed.
(1) Synopsis
• Sets the timeout time of remote consoles (telnet, ssh)
• Resets the timeout time of remote consoles to the default value
(2) Options
z seconds
Specifies the timeout time (s).
The setting range is 0 to 900 (s), and the default value is 300 (s). If 0 is specified, no
timeout occurs.
(3) Command mode
Line
(4) See also
None
exec-timeout <seconds>
no exec-timeout