Filter
Top Products
C122-E003-02EN 3-49
MMB
3.2 System Menu
FLI FLI status:
• OK: Operating normally
• Warning: Operating but requires maintenance (Contact a
certified service engineer.)
• Failed: Failure
FLP#0 to #1 FLP status:
• OK: Operating normally
• Warning: Operating but requires maintenance (Contact a
certified service engineer.)
• Failed: Failure
PXH#A0, #A1
PXH#B0, #B1
PXH status:
• OK: Operating normally
• Warning: Operating but requires maintenance (Contact a
certified service engineer.)
• Failed: Failure
Onboard GbE#0, #1 GbE status:
• OK: Operating normally
• Warning: Operating but requires maintenance (Contact a Fujitsu
certified service engineer.)
• Failed: Failure
Onboard SCSI#0, #1 SCSI status:
• OK: Operating normally
• Warning: Operating but requires maintenance (Contact a Fujitsu
certified service engineer.)
• Failed: Failure
DC-to-DC Converters
Redundancy Redundancy statuses of DC-to-DC converters 00 and 01:
• Redundant: Redundancy is maintained.
• [Non-redundant: Sufficient Resources]: Redundancy is lost, but
there are enough converters to continue system operation.
• [Non-redundant: Insufficient Resources]: Redundancy is lost,
and there are not enough converters to continue system
operation.
DDC#00 to #01 Statuses of DC-to-DC converters 00 and 01:
• OK: Operating normally
• Not present: Not installed
• Configuration error: Configuration error
• Failed: Failure
Redundancy Redundancy statuses of DC-to-DC Converters 02 to 04.
These statuses are displayed in the same way as the redundancy
statuses of DC-to-DC Converters 00 and 01.
Item Description