C122-E003-02EN 8-149
GSWB
8.3 Operation Commands
(2) Options
z {on|off}
- on: Sets the pager function to ON.
- off (default value): Sets the pager function to OFF.
(3) Command Mode
user exec
enabled exec
(4) See also
show terminal
(5) Examples
z Toggles the pager function setting to ON
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
8.3.1.6 show terminal
This command displays the basic settings for terminal output.
The window size setting of the terminal depends on the terminal type.
(1) Synopsis
• Displays terminal settings
Switch>terminal pager on
Switch>
show terminal [status]