Filter
Top Products
C122-E003-02EN 8-171
GSWB
8.3 Operation Commands
(5) Examples
• Displays the global MAC address
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Mac address isn’t set.
Cause: The MAC address has not been specified.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit or contact a
certified service engineer.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.2.6 show memory
This command displays the status of each memory resource.
(1) Synopsis
Switch# show globalmac
Global MAC Address
00:00:0e:90:00:00
Switch#
show memory