Filter
Top Products
5. Take corrective action based on the results of checked scripts and files.
- When there are no errors in the scripts or files checked in 4.
Request confirmation from a tenant administrator or tenant user that there are no errors in the parameters taken over during the
L-Platform update.
- When there are errors in the scripts or files checked in 4.
The infrastructure administrator will log in to the firewall directly, delete the failed configuration (such as rejection of
communication packets), and modify error scripts or files.
6. Take corrective action based on the results of parameter checks.
- When there are no errors in the parameters taken over during the L-Platform update
Confirm with the administrator of the network device that the firewall configuration has not been modified, since an unexpected
definition modification may have been made.
- When there are errors in the parameters taken over during the L-Platform update
The infrastructure administrator will log in to the firewall directly and delete the failed configuration (such as rejection of
communication packets).
7. Take corrective action based on the check results if definitions have been modified.
- When the network device administrator has not modified the configuration
Extract the firewall definitions and check the content. When inappropriate settings have been configured, log in to the firewall
directly, and modify the definitions.
- When a network device administrator has modified the configuration
Check if the configuration modification is necessary.
- When the configuration modification is not necessary
The infrastructure administrator must log in to the firewall directly, and delete or modify the problem-causing configuration
(such as rejection of communication packets).
- When configuration modifications were necessary based on the system operation policy
Review if the details of scripts, parameter files, and interface configuration files are based on the operation policy.
11.4.2.2 When a Firewall Changing State is Detected during Status Confirmation Using
the ROR Console
Use the following procedure to confirm the status of the firewall.
1. Select the network device of firewall on which changing state occurs from the network device tree.
2. Select the [Resource Details] tab.
3. Confirm the status of the firewall.
4. Identify the L-Platform in use.
a. Confirm the name of the firewall allocated using auto-configuration by checking the items in displayed results of the rcxadm
netdevice show command (AllocatedResources[Firewall]).
b. Confirm the name of the L-Platform using the firewall by checking the items in displayed results of the rcxadm firewall show
command (L-Platform Name). Specify the firewall name confirmed in a. as the firewall name to be specified for the name
option.
5. Confirmation procedure after this, refer to the operation after step 3. of "11.4.2.1 When an L-Platform Using a Firewall is
Identified".
- 103 -