Filter
Top Products
Note
- If the applicable start date is not set to a future date and time, modify the charge information after the system has stopped. If system
operation is not stopped, the pre-modification amounts may be displayed for the estimated charges and usage charges.
- The displayed price does not change for the subscription from saved specifications if the specifications are saved before modifying
the price. Notify the tenant of the cautions that the price will not be the price displayed on the L-Platform management window but
be the modified price after the modification date.
15.3.3 Delete Accounting Information
Delete the accounting information if the accounting calculation becomes unnecessary for the L-Platform templates or the L-Server imported
into the system.
The accounting information becomes unnecessary if the following conditions are met.
- The L-Platform templates are disabled
- The log that shows the usage result of the corresponding L-Platform templates or L-Server imported into the system. does not exist
in the metering log.
Follow the procedure below from disabling the L-Platform templates to deleting the accounting information.
Begin from "Check Metering Log" for L-Servers imported into the system.
See
Refer to "Appendix B Metering Log" for information on the metering log.
Disable L-Platform templates
1. Notify to the tenant about the contents of the L-Platform templates to be disabled (L-Platform template name, usage fee (the estimated
price), start of applicable date, etc.).
2. Disable the L-Platform templates on the date that was notified.
Disable the L-Platform templates using the template management window of the ROR Console. Refer to "8.3.6 Publishing and
Hiding L-Platform Template" in the "User's Guide for Infrastructure Administrators CE" for information on the setting for disabling
the L-Platform template.
Check Metering Log
1. Check that the log that shows the usage result of the corresponding L-Platform templates does not exist in the metering log.
Output the metering log by the output metering logs command to check that no resource identifiers corresponding to the category
code of that accounting information and no information for the item ID corresponding to that exists in the metering log.
The correspondence relationships between category codes and resource identifiers in the accounting information and item IDs in
the metering log are shown below.
- 125 -