Filter
Top Products
/etc/opt/FJSVcfmg/config/vsys_config.xml
2. The following information must be modified:
Key Description Default value
use-charge (*) Specifies whether usage fee (the estimated price) for the
L-Platform template will be displayed.
- yes: Display
- no: Do not display
no
* note: this can be set by "Setup Wizard" on the ROR Console.
A setting example is shown below.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>
... omitted
<entry key="use-charge">yes</entry>
<entry key="charge-host">localhost</entry>
<entry key="charge-port">3550</entry>
<entry key="charge-uri">/resource/ver1.0</entry>
... omitted
</properties>
3. Open the following file.
[Windows Manager]
Installation_folder\RCXCTMG\MyPortal\config\custom_config.xml
[Linux Manager]
/etc/opt/FJSVctmyp/config/custom_config.xml
4. The following information must be modified:
Key Description Default value
estimation-mode (*1) Specifies whether usage fee (the estimated price) for the
L-Platform template will be displayed.
- 3: Display
- 0: Do not display
Set to "3" if use-charge in vsys_config.xml is set to "yes",
or to "0" if use-charge is set to "no".
0
compatible-estimation
(*2)
When overcommit is enabled, specify whether to
calculate usage fee (the estimated price) using the
operating value or the reserved value.
- true: Calculate using operating value (CPU
performance and/or memory capacity)
- false: Calculate using reserved value (reserved CPU
performance and/or reserved memory capacity)
false
*1 : this can be set by "Setup Wizard" on the ROR Console.
*2 : These settings are only valid when the overcommit function is enabled. Refer to "19.6 Settings for the Overcommit Function"
in the "Setup Guide CE" for further details.
Note also that these settings are only valid when either VMware or Hyper-V is used as the virtual software. If any other virtual
- 35 -