Filter
Top Products
Chapter 7 Management of L-Platform
This chapter explains how to management of L-Platform.
7.1 Review for L-Platform Usage Applications
Use the [Request] tab of the ROR console to review applications to use from tenant users for operations such as usage application,
configuration modification, and cancel of L-Platforms.
For details on the [Request] tab, refer to "Chapter 10 Request" in the "User's Guide for Infrastructure Administrators CE".
7.2 Administration of L-Platform
This section explains how to perform L-Platform operations.
7.2.1 Deleting Unnecessary Data
If an L-Platform or server deployed by this product was accidently deleted by virtualization software such as VMware, it is possible to
delete unneeded information about the system or server remaining in this product.
What is actually done is that the unneeded L-Platform information or server information status is changed to "Finished with return" with
the cfmg_deletesysdata(Unnecessary Data Deletion) command so that it is no longer displayed in the L-Platform management View.
Refer to "12.3 cfmg_deletesysdata (Unnecessary Data Deletion)" in the "Reference Guide (Command/XML) CE" for details on this
command.
7.2.2 Updating the Cloning Image
In this product, the resource ID is used when managing the cloning image.
If the cloning image has been updated, the resource ID will be changed, so the image information must be updated in order to return the
resource ID back to its previous setting.
If the cloning image has been updated, use an operation from the "Template" window to update the image information.
Refer to "8.3.8 Synchronizing Image Information" in the "User's Guide for Infrastructure Administratorsfor CE" details.
Point
To use both cloning masters (the cloning master before the update and the cloning master after the update) in the L-Platform template,
updating a single cloning master will not work. Instead, these cloning masters must be collected separately.
7.2.3 Importing to L-Platform
This section explains how to import physical servers, virtual machines, and L-Servers to an L-Platform.
There are the following two ways of importing physical servers, virtual machines, and L-Servers to the L-Platform Management function:
- Convert configured physical servers or virtual machines into L-Servers, then import the converted L-Servers to the L-Platform
Follow the procedure described below to convert configured physical servers or virtual machines into L-Servers and import to the L-
Platform:
a. Convert the physical servers or virtual machines into L-Servers
Refer to "Use of Physical Servers or Virtual Machines as L-Servers".
b. Network Information Settings for Converted L-Servers
Refer to "7.2.3.1 Network Information Settings for Converted L-Servers".
- 15 -