Filter
Top Products
Note
- If switchover of an admin server occurs while L-Servers are operating, the operation being performed may fail.
If you were creating or registering resources, delete unnecessary resources and then perform the operation again.
- When performing L-Server creation or ETERNUS configuration information modification using ETERNUS, if an error occurs on an
admin server, ETERNUS may not be able to return from the status of processing to normal status. In this case, to restore, forcibly log
on from ETERNUSmgr, then log off. In the case of ETERNUS DX60/DX80/DX90, contact Fujitsu technical staff. For details on how
to restore ETERNUS, refer to the ETERNUS manual.
- 172 -