Filter
Top Products
Point
The unit price, unit code, and 1 month's usage charges for each resource specified in the charge information are displayed as usage charge
information for each month from the ROR console Accounting tab to Usage Charge Detail window.
Refer to "12.3 Usage Charge Detail" in the "User's Guide for Infrastructure Administrators CE" for information about the Usage Charge
Detail window. Also, tenant administrators can refer to the same information. Refer to "11.2 Usage Charge Detail" in the "User's Guide
for Tenant Administrators CE" for information about the Usage Charge Detail window viewable by tenant administrators.
15.4.4 Resource Usage Amounts and Times
If charging by amount is to be used for resources, the usage charge is determined by the amount of resources used and the time they are
used for.
The following table shows the relationship between the product categories for each resource, the amount of resources used, and the usage
time:
Resource Product category Resource usage amount Usage time
L-Platform Template Total number of deployed L-
Platforms
L-Platform deployed time
L-Server
- Virtual L-Server
- Physical L-Server
Total number of deployed L-Servers Deployment time of the L-Server
CPU CPU CPU number Operating time of the L-Server
CPU clock Use one of the following:
- CPU performance (GHz)
- CPU reserved performance
(GHz) (*)
Memory Memory capacity Use one of the following:
- Memory (GB)
- Memory reserved (GB) (*)
Operating time of the L-Server
Extension disk Data disk capacity Disk size (GB) Disk deployment time
* Note: This is the default value when overcommit is enabled on the virtual L-Server. These can be changed by changing the settings.
Point
Usage Charges for physical L-Servers.
The calculation of Usage Charges for the CPU, CPU clock, and memory capacity of the physical L-Server are calculated using the values
input into the L-Platform Management window (input value). Also, a server that is close to the input value in the specified server pool
will be deployed as the physical L-Server. For that reason, if charging for the physical L-Server, perform operations such as preparing
multiple physical L-Servers that are close to the input value in the server pool.
CPU usage charges
The usage charge for the CPU is calculated based on the CPU and the CPU clock. The calculation formula is as follows:
(CPU unit price / 60 (minutes) + CPU clock unit price / 60 (minutes) x CPU clock count / 0.1) x CPU count x usage time
15.4.5 Example of Usage charge Calculation
Here we will describe an example of calculation, using an L-Platform with the configuration shown below.
- 128 -