Filter
Top Products
5. Register the added firewall, server load balancer, and L2 switch as network devices.
Use the rcxadm netdevice create command to register as a network device.
6. When the following applies to the additional network device, create and register rulesets.
- When adding a firewall, server load balancer, or L2 switch of a model for which sample scripts are not provided, or those of a
model that has not been used in the system until now
In this case, it is necessary to create a directory to allocate rulesets to.
- When using a model for which sample scripts are not prepared, or even when using a model which has been used in the system
until now, by configuring definitions using the different rules (scripts)
- Even when using a model for which sample scripts are prepared, and when using a model with definitions configured using
different rules (scripts)
Note
Details of sample scripts may be reviewed and modified. When using rulesets modified from prepared sample scripts, the modified
details will be cleared by replacing the modified scripts with the sample scripts, when updating sample scripts.
In order to prevent this type of problem, when creating scripts by referring to sample scripts, create the new rulesets after copying
the rulesets of the sample script, and perform necessary modifications.
7. Create a tenant and register a tenant administrator.
8. Back up environments using the functions provided by the firewall and server load balancer.
Backups can be used for restoration when replacing firewalls or server load balancers due to device failure.
For details on how to back up environments, refer to the manuals of the firewall and server load balancer being used.
9. Register additional servers, firewalls and server load balancers in a resource pool for tenants as resources.
See
- For details on the initial configurations of network devices, refer to "9.2.3 Settings for Managed Network Devices" in the "Design
Guide CE".
- For details on how to create network configuration information (XML definition), refer to "14.6 Network Configuration Information"
in the "Reference Guide (Command/XML) CE".
- For details on the rcxadm netdevice command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".
- For details on ruleset creation and the registration destinations, refer to "F.3 Creating a Folder for Registering Rulesets" in the "Setup
Guide CE".
- For details on how to create a tenant, refer to "11.3 Creating Tenants" in the "User's Guide for Infrastructure Administrators CE".
- For details on how to register tenant administrators, refer to "Chapter 3 Operating User Accounts" in the "User's Guide for Infrastructure
Administrators (Resource Management) CE".
- For details on how to register a resource in a resource pool, refer to "Chapter 19 Resource Operations" in the "User's Guide for
Infrastructure Administrators (Resource Management) CE".
9.5.4 Procedure for Addition or Modification of Connection Destinations of
Network Devices
This section explains the procedure for adding or modifying destinations for network device connection.
When there is no description, the following operations are performed by an infrastructure administrator.
1. Notify your infrastructure administrator about the addition or modification of the destination for network device connection.
(Network device administrator)
- 70 -