Filter
Top Products
Definition File Format
For the definition file, write each line in the following format:
Key
=
Value
When adding comments, start with a number sign ("#").
Definition File Items
Specify the following items in a definition file.
Table 17.1 List of Items Specified in Definition Files for Checking Spare Server Models and Configurations
Item Key Value Remarks
Policy of
Switchover
OVERALL_POLICY
skip Configure the check policy of the L-Server definition for the
whole system and the spare server configuration.
- skip
Omits the check of whether or not there is a server that
satisfies the spare server conditions.
Even if a server pool that does not satisfy the conditions
is selected, creation and modification of an L-Server are
performed without checking.
- warning
Server pools without servers that satisfy the spare server
conditions are also displayed.
When a server pool that does not satisfy the conditions is
selected, a warning message is displayed during creation
and modification of an L-Server, checking whether to
continue the operation.
- error
Server pools without servers that satisfy the spare server
conditions are not displayed.
Therefore, a server pool that does not satisfy the spare
server conditions cannot be selected.
Server switchover is not possible when the destination
cannot be found while performing the switchover, even if
the check has been made in advance.
warning
error
Compatibility of
Server Model (*)
SPARE_SVR_COMP
AT
X
(
X
is a number from 0
- 255)
["
modelA
","
modelB
"]
Define compatible server models as a group.
When checking the L-Server definition and the spare server
configuration, the server models in the same group are the
target of switchover.
Examples of server models are as below.
- BX920 S1
- BX920 S2
* Note: The value of SPARE_SVR_COMPAT is changeable. Server switchover may fail depending on the combination of changed
values, such as when a server with no compatibility is set as a spare server.
Example Definition File
# Spare server check configuration
# Spare server check logic's policy: skip | warning
- 161 -