Fujitsu J2X1-7611-03ENZ0 Computer Accessories User Manual


 
Settings for the Email Sent from Tenant Management
Email sent from the tenant management will be enabled only if the tenant has set the Performing tenant management setting.
When an operation such as registering a tenant or adding or changing a user has been performed, notification to that effect is sent to the
tenant administrators, tenant users, and tenant email addresses within that same tenant.
Refer to "19.1 Settings for Sending Email" in the "Setup Guide CE" for information on how to change settings for e-mail sent from tenant
administrators.
Settings for Email Sent from the L-Platform Management Window
Email sent from the L-Platform management window notifies the end or failure of processing to the tenant administrators and the tenant
users when the tenant users have used the ROR Console to perform an application to use L-Platform, an L-Platform modification, or an
application to cancel L-Platform.
Refer to "19.1 Settings for Sending Email" in the "Setup Guide CE" for information on how to change settings for email sent from the L-
Platform Management window.
Email Sent from the Usage Charge Calculator
Email will be enabled if the calculator for charges is used.
A usage charge file is sent to the set email address with the monthly usage charges for each tenant.
Refer to "19.1.4 Email Sent from the Usage Charge Calculator" in the "Setup Guide CE" for information on the email settings used for
the usage charge calculator.
Email Sent via an Application Process
An email will be sent via the application process when changes or requests have been made.
The following notification will be sent for an application to use L-Platform, an L-Platform modification, or an application to cancel L-
Platform from the L-Platform management window:
- Notification of acceptance of application, rejection of application, and dismissal of application to the tenant users
- Notification of request for approval and dismissal of application to the tenant administrators
- Notification of request for assessment to the infrastructure administrators
Refer to "19.1.6 Settings for Email Sent via the Application Process" in the "Setup Guide CE" for information on how to change settings
for email sent from an application process."
Settings for the Email Sent from the Dashboard
Email sent from the Dashboard will be enabled only if using the dashboard alert function.
The dashboard sends notifications to e-mail address setting in Customizing Email Send Settings if the global pool use rate exceeds the
threshold value.
Refer to "19.1.7 Settings for Email Sent from the Dashboard" in the "Setup Guide CE" for information on how to set settings for email
sent from the dashboard alert function.
8.3 Settings for Port Number of Management Servers
This section explains how to change the port number of the Management Server as follows:
- ROR console server port number
- L-Platform management port number
Stop the manager before changing the port number. Restart the manager after changing the port number.
Refer to "2.1 Starting and Stopping the Manager" for information on how to start and stop the manager.
Note that there is no need to stop and start the manager for each port number.
Changing the Port Number of the ROR Console Server
The procedure for changing the port number is as follows.
- 23 -