Filter
Top Products
5. Configure firewalls
When configuring an application on an L-Server that has been deployed on the public LAN, the tenant user needs to create a rule
that enables access to that L-Server from the public LAN.
6. Configure applications
The tenant user performs the installation and environment settings necessary for the application to be provided as a service by the
L-Server.
7. Confirm communication with applications
The tenant user checks that there are no problems with the applications installed on the L-Server, and that the L-Server can be
accessed from the public LAN.
When a firewall has not been configured, configure one.
If there are no problems in the communication check, proceed to the next step.
If there are problems, resolve them and check communication again.
8. Configure server load balancers
When an L-Platform has a server load balancer deployed, the tenant user performs configuration of the server load balancer.
9. Check communication with server load balancers
When an L-Platform has a server load balancer deployed, test that the settings of the server load balancer are correct.
It is necessary to configure the rules for the firewall so that communication using the virtual IP address configured for the server
load balancer is possible.
If there are no problems in the communication check, proceed to the next step.
If there are problems, resolve them and check communication again.
10. Configure firewalls
Configure address translation and firewall rules, and then test that communication with the L-Server is possible.
If the test shows no problems, configuration of the L-Platform operation environment is complete.
If there are problems, resolve them and check communication again.
1.1 Operation, Maintenance, and Monitoring by Infrastructure
Administrators
This section explains operation, maintenance, and monitoring by infrastructure administrators when using Resource Orchestrator.
Infrastructure Administrator (infra_admin) Operations
Refer to the "User's Guide for Infrastructure Administrators (Resource Management) CE" for the [Resource] tab operations.
Refer to the "User's Guide for Infrastructure Administrators CE" for other operations.
Infrastructure Administrator (infra_admin) Management Operations
The operations that infrastructure administrators (infra_admin) can perform are as follow.
- Management of resources and resource pools
- Registration, modification, and deletion of resources
- Creation, deletion, modification of global pools and tenant local pools
- Review and confirmation of application status and L-Platform usage applications
- Management of tenants
- Creation, modification, and deletion of tenants
- 3 -