Filter
Top Products
Figure 9.5 Image of L2 Switches to Add
1. Design additional configurations. (Network device administrator)
2. Provide the additional network device information to the infrastructure administrator. (Network device administrator)
Add a network device in the state where the following operations have been completed.
- Initial configuration
- Operation test
- Integration of the device into a physical network configuration
3. Register the resources of the server.
It is necessary to register chassis or LAN switch blades for a blade server.
4. Create network configuration information (XML definition) using the acquired network device information.
5. Register an additional L2 switch as a network device.
Use the rcxadm netdevice create command to register as a network device.
- 67 -