Filter
Top Products
Chapter 4 FRU Removal Preparation 4-37
4.7.1.2 When Three External I/O Expansion Units Mounted
This section provides an example of the cable routing procedure applied when three
external I/O expansion units are mounted in the rack space for the SPARC
Enterprise M8000 server.
Cable Routing Procedure
The cable routing procedure explained below is an example of the recommended
procedure.
This section explains the recommended cable routing procedure in an example using
a configuration in which three external I/O expansion units are mounted and 34
LAN cables are connected to each external I/O expansion unit.
When actually routing cables, perform the work properly with reference to this
procedure while following the precautions for cable routing.
Hook-and-loop Fasteners Used
This procedure specifies only the short and long hook-and-loop fasteners
recommended for use. During actual cable routing, use the type of hook-and-loop
fastener appropriate for the number of cables to be bound.
1. Run 72 LAN cables (of the cables connected to the external I/O expansion units)
along the right route.