Filter
Top Products
24-1
CHAPTER
24
Addition and Deletion of a RDPF
Option, Power Cabinet, and M9000
Expansion Cabinet
This chapter explains the procedures for adding and deleting a rack-mountable dual
power feed option (RDPF), a power cabinet, and an M9000 expansion cabinet, all of
which are server options. In the chapter, deletion of such an option means that the
work of removing it involves moving the server.
These options are not FRUs. Normally, the system configuration has been
determined prior to shipment, so the options are not intended to be added or deleted
by a user or field engineer. However, if the system configuration is changed or the
system is transported to another location, addition or deletion of one of the options
may be required. The sections below explain the following:
■ Section 24.1, “Addition and Deletion of Rack-mountable Dual Power Feed” on
page 24-2
■ Section 24.2, “Addition and Deletion of Power Cabinet” on page 24-13
■ Section 24.3, “Addition and Deletion of M9000 Expansion Cabinet” on page 24-16
For the basic installation procedures, see the SPARC Enterprise M8000/M9000 Servers
Installation Guide. No section in the SPARC Enterprise M8000/M9000 Servers
Installation Guide explains this addition and deletion work. Interpret an installation
procedure as an addition procedure and a removal procedure as a deletion
procedure.