Filter
Top Products
Chapter 2 Product Overview and Troubleshooting 2-35
■ console message log
■ panic message log
■ IPL message log
2.8.2 Using the fmdump Command
The fmdump command can be used to display the contents of any log files associated
with the Solaris Fault Manager.
The fmdump command produces the following output. This example assumes there
is only one fault.
2.8.3 Using the fmadm Command
This section describes the use of the fmadm command.
The administrator and all service personnel can use the fmadm command. This
command can display and change the system configuration parameters managed by
the Solaris Fault Manager.
2.8.3.1 fmadm config Command
The fmadm config command outputs the version and status of the diagnostic
engine used by the server. To determine whether the latest diagnostic engine is
running, compare the version with the information on the SunSolve website.
XSCF> showlogs error
Dated: Mar 30 12:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff0
Status: Alarm
Component: PSU#1,PSU#2
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Date: Mar 30 17:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff0
Status: Faulted
Component: PSU#1,PSU#2,*
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
XSCF>0
# fmdump
TIME UUID SUNW-MSG-ID
Nov 02 10:04:15.4911 0ee65618-2218-4997-c0dc-b5c410ed8ec2 SUN4-8000-0Y